Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$4.99
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.

$10.99
The perfect bike fit is priceless. These FSA Polycarbonate Headset Spacers, however, are very affordable, and an easy way to dial in that fit for optimum performance and comfort.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x8 Flat Head Screws

$140.00
- Allows easy, tool-free adjustment of spring rate
- Includes spring, adjuster, and 5 performance adapters
- Lightweight (highest grade steel allows less material)
- See https://sprindex.com/pages/compatibility for fitment details

$99.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 8mm
- Outer Diameter: 22mm
- Width: 7mm

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913000-001 - Attaches to frame with (2) M4x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$9.99
Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed.
- Includes 2 clamps and screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Ghost #EZ1954 - (2) M4x8 Flat head screws included

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 flat head screws included - Replaces Giant Part #27163

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish

$13.99
Elastomers are designed for use with eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Extra Soft: 40 Durometer
- Soft: 50 Durometer
- Medium: 60 Durometer
- Firm: 70 Durometer
- Extra Firm: 80 Durometer

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Pinarello part #PI-DROP-OUT-TA-RIGHT-IN - Attaches to frame with (1) M4x14 Flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$48.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Specialized Part #S172600001 - Includes both sides of the derailleur hanger - Attaches to frame with (1) M3x6 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Trek Part #W524188 - Attaches to frame with (2) M3x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances.
- CNC-machined 6061 aluminum
- Black anodized finish
- Attaches to frame with (1) M5x.08x15 FH
Compatibility:
Cannondale
- Synapse Hi-Mod Disc (w/ DT M12x1 TA)—2018
Canyon
- Dude CF—2015
- Dude CF—2016
- Dude CF—2017
- Dude CF—2019-2020
- Grand Canyon AL SLX WMN—2019-2020
- Grand Canyon CF 29—2015
- Grand Canyon CF 29—2016

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #235286 - Attaches to frame with (2) special M5x10 screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$10.00
The Mushroom Nuts thread into your Dummy frame (both the Big and the Big Fat kinds) and tensions your Dummy Bags, securing your various goods and things.
- Made from durable stainless steel

$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

$31.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.