Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

$9.99
Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi
$18.99 - $20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included
$141.95
T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch
- With plastic washers - Shell: 8mm Allen head axle bolt
$21.00
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$41.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$359.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BBright for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BBright - Opening diameter: 46mm - Shell width: 79mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$298.00
PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ZERØ Ceramic Hybrid - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 106g
$121.50
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 73mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 156g
$100.28
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g
$118.65
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g
$359.00
BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet
$459.00
The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard. If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need. CeramicSpeed bearings are installed in cups. The Standard Bearing has ceramic CeramicSpeed balls and hardened-steel races. The Coated Bearing has the same balls running on hardened-steel races with a 3-micron-thick metallic coating making the races harder and smoother, increasing service life and reducing friction. Enjoying the benefit of a massive, strong, and light 30mm crank spindle in your BB86 frame is possible with this kit. Press in the cups, set up the wave washer, add spacers if necessary, and torque down. CeramicSpeed's bottom bracket is also stiff and light, but its greatest benefits come in the form of drag reduction. Standard Bearings with stock grease typically have frictional drag of 0.3-0.4 watts per set. That's about a 75% drag reduction compared to conventional bottom brackets. The bearings also last at least three times longer than other bearings. Performance can be tuned by replacing grease. All Round comes with this BB, but you can change it to TT and Track Grease for less drag or to LongLife for greater durability. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Plastic cable protector - 10ml syringe All Round Grease - Sticker sheet
$15.99 - $24.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$110.00
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 129g
$144.53
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. This means smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g
$459.00
The BB86 mountain bike standard was designed to integrate bearings into the bottom bracket for weight reduction. This kit works with the standard: it consists of two cups that are pressed into either side of the shell. There are two versions of this bottom bracket. Both come with CeramicSpeed Bearings installed into cups. The first is our long-life, low-drag Standard Bearing with hardened-steel races and our CeramicSpeed super-round, super hard balls. The second is our Coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. This CeramicSpeed BB86 Bottom Bracket meshes with cranks that have 24mm spindles, including both Shimano and FSA. CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That means an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan to applying a coating to the races. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box - 2 bottom bracket cups with bearings installed - 2 dust covers with integrated spacers installed - Spacer tube - 10ml syringe of LongLife Grease - Sticker sheet
$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$41.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard - Gutter Seal Technology drastically improves sealing against the elements - Significantly lighter than GXP system - Sealed cartridge bearings
$13.99 - $23.99
- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams
$123.99
T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM and Truvativ GXP cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer - Drive Side Bearing: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.2mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 162g
$32.00
A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle
$124.99
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
$33.99
• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets
$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Compatible with Cannondale Ai frames - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$144.25
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing SRAM DUB Compatible cranks in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - 1x - 2.5mm crank spindle spacer - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm Asymmetrical - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields. - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 158g
$30.99
- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams
$99.00 - $144.53
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g
$359.00
This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm. This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups. 30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system. The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings. You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Spacer tube - 10ml All Round Grease - Sticker sheet
$118.65
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g