Lighting

The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. - Max 150 lumens / 20-hour runtime in Femto mode - Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

- Super bright, USB rechargeable COB LED rear light - 4 modes including 2 steady brightness levels and 2 flash settings - USB rechargeable design includes charging cable - Compatible with 25.4 to 31.8mm seatposts

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8

• Set of 1 LED white front and 1 LED red rear lights • Ultra bright Cree LEDs • Two mode (Steady and Flashing) • Batteries included (4 x CR2032) • Velcro strap universal mount

- High brightness 16 chip COB style LED combo set - Perfect for increasing safety on commutes and neighborhood rides - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included Modes: 4F/4R Mount: Rubber Strap Rechargable: UB Lumens: 60/30 Lumen Range: 1-100

- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap

- 1.5 watt, 100-lumen USB-rechargeable headlight - 4 steady modes and 2 flash settings - Low-battery indicator

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Replacement mounting strap for the Zecto and Femto LED lights.

Replacement mounting strap for the new year 9 Hecto XL, Micro XL, Macro XL, Power XL.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

The Recon TL Rack mount securely attaches your Recon tail light to your rear rack. - Bracket securely attaches Recon TL 200 / 100 to a rear rack - Compatible with Recon TL 200 and Recon TL 100 only

Brighten up your style, increase your visibility, and make those nighttime rides more fun with the Serfas SPK Spoke Lights! Available in FIVE fun LED light colors: White, Red, Green, Multicolored, and Blue. The SPK Spoke Light is quick and easy to mount and sure to stay safely secured while traveling across any terrain, and with built-in water resistance the SPK ensures a splash or two won't send you home in the dark. Add one, or even twenty, to your bike today and be the coolest cat on the block! - Water Resistant - Fast & Easy Installation / Removal - Solid Modes: Up To 30 Hours - Flash Modes: Fast – Up To 35 Hours / Slow – Up to 55 Hours - Weight: 20 Grams - Size: 12.8cm x 4.4cm - Battery: 1 x Lithium CR2032

Custom CNC-machined aluminum and Composite Matrix handlebar adapters replace LED bike light mounts, making them GoPro-compatible mounts. LED Compatibility: CNC-Machined Aluminum Mini 400XL, Hecto 500XL, Micro 600XL, Micro Pro 800XL, Lite 1000XL, Fusion 500+, Fusion Pro 600+, Micro 800+, Micro Pro 1000+, Lite 1200+, Hecto StVZO 40, Hecto StVZO Pro 65, Lite StVZO Pro 115, Power StVZO Pro 115+, Hecto StVZO 230+, Micro StVZO 300+, Hecto Pro StVZO 400+, Macro StVZO 500+, Super StVZO 600, Macro 500+ Reverse, Deca StVZO 1250. Not compatible with Zecto Drive, Classic Drive, Strip Drive, KTV Drive or Femto Drive lights. Composite Matrix Mini 400XL, Hecto 500XL, Classic 500, Classic 700XL, Micro 600XL, Micro Pro 800XL, Lite 1000XL, Macro 1300XXL, Super 1600XXL, Mega 1800i, Classic 500+, Classic XL 700+, Macro 1400+, Super 1800+, Mega 2400+ Hecto StVZO 40, Hecto StVZO Pro 65, Lite StVZO Pro 115, Power StVZO Pro 115+, Power HB StVZO 500, Macro 500+ StVZO Reverse, Deca StVZO 1250. Not compatible with Zecto Drive, Strip Drive, KTV Drive or Femto Drive lights. Limited StVZO Compatibility StVZO LED Bottom Mount (LED above handlebar). StVZO Reverse Mount applications are limited to specifically designed models and they are marked as such. This product is not affiliated with, endorsed by, or in any way associated with GoPro Inc. or its products and services. GoPro, HERO, Session, Karma, and their respective logos are trademarks or registered trademarks of GoPro, Inc.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

A unique, innovative clamp system that clips securely and discreetly to your seat rails. Compatible with Recon TL 200 and Recon TL 100 only. Light not included

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

A versatile, adjustable mount be used with a Giant helmet featuring a GoPro compatible mount surface. Mount your light, and easily switch between Recon headlights and your GoPro camera. Compatible with Recon HL 200 and Recon HL 100 only. - Compatible with Recon HL 200 and Recon HL 100 only

A universal mount that fits standard 22-35mm handlebars and aero-shaped handlebars. An easy on/off rubber strap mount allows quickly switching Recon lights from bike to bike. - Fits all Recon HL series lights* - Not compatible with Recon HL 200 and Recon HL 100

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h